C
Specifications
WP 2300 Series
Walkie Pallet
Truck
WP 2300
Series
Specifications
WP 2300 Series
1
2
3
4
5
8
9
Manufacturer
Model
Load Capacity
Power
Operator Type
Lift Height
Lift
Crown Equipment Corporation
WP 2330
4500
24 Volts
Walkie
9.25
6
7.9
23.2
21.3/26.4
WP 2335
4500
24 Volts
Walkie
8.5
WP 2340
WP 2345
lb
4500
24 Volts
Walkie
9.25
4500
24 Volts
Walkie
8.5
5.2
9.1
Electric
Stand-up
in
in
in
in
in
5.2
6
Battery Compartment Length
7.9
9.1
10 Head Length
16 Outside Fork Spread
23.2
24.4
24.4
21.3/26.4
21.3/26.4
21.3/26.4
17 Tiller Arm Height
Min/Max
in
31.1 / 47.5
3.7 / 3.4
in Drive Position
18 Travel Speed
Empty/Loaded
mph
WP 2300 Series
WP 2330
36/42/48
WP 2335
48
WP 2340
36/42/48
WP 2345
48
Nominal Fork Length
11 Actual Fork Length
12 Overall Length
13 Wheelbase
in
in
in
in
in
%
%
in
lb
35.6/41.7/47.6
58.8/65.0/70.9
44.2/50.3/56.2
39.7/45.8/51.7
52.7/44.5/38.7
10
45.5
67.7
55.2
52.1
31.6
10
35.6/41.7/47.6
60.0/66.1/72.0
45.4/51.5/57.4
40.8/46.9/52.8
50.9/43.2/37.8
10
45.5
69.9
56.4
53.3
30.6
10
Lowered
Raised
14 Grade Clearance*
Gradeability
15 Turning Radius
Loaded
51.6/57.7/63.6
712
62.6
712
52.8/58.9/64.8
712
63.8
712
7
Truck Weight**
Less Battery
* Determined with forks raised
**With 48" forks
Technical Information
WP 2300 Series
Standard Equipment
Optional Equipment
•
•
•
Maintenance-free battery
pack, four 6-volt batteries
at 195 amp hour
Operator Controls
1. 24-volt fused electrical system
1. Casters
The WP’s robust X10™ control
handle is designed to allow for
an optimum turning radius with
low steer effort. All control but-
tons can be operated with either
hand and can be accessed with
minimum hand and wrist move-
ment. The horn switches are
integrated in the hand grips.
An ergonomic forward/reverse
thumb wheel allows for precise
maneuvering. Depending on the
conditions, maximum travel
speed can be reduced via the
rabbit/turtle switch. The parking
brake is activated at the lower
and upper end of the tiller
2. MOSFET transistorized
traction control system
2. Hour meter
3. Discharge indicator
Wet-cell swing-out battery
pack, four 6-volt batteries
at 160 amp hour
3. Separately excited drive motor
(SEM)
4. Curtis Unigage includes hour
meter, discharge indicator
with interrupt
4. Electric brake
Dry-cell swing-out battery
pack, four 6-volt batteries
at 160 amp hour
5. Brake override
5. Handset analyzer for calibra-
tion or fault analyzing
6. Anti-roll down
7. Regenerative motor braking
8. Heavy-duty drive unit
6. 30 amp fully automatic
charger
The optional nylon battery straps
secure the batteries to the stand
to minimize vibration in rough
floor or over dock applications,
reducing potential damage to
the batteries or the stand.
7. 48", 60" or 72" high load
backrest
9. Drive unit enclosed in high
ductile strength steel frame
8. Maintenance free or swing-
out battery package
10. Stamped steel power unit
cover
9. Freezer/corrosion
conditioning
The 9.1" battery compartment
(WP 2340/WP 2345) will accept
an industrial storage battery up
to 300 amp hour capacity.
11. Safety reversing button
position.
12. Roll formed forks with pull rod
height adjustment
WP 2300 Brake Override
Function
10.Polyurethane drive tire
11.Non-marking rubber tire
12.Siped rubber drive tire
13. 175 amp connector with
quick disconnect
For easy operation in tight areas
a brake override function is
incorporated which allows the
WP 2300 to be driven safely
and precisely at creep speed
with the handle in a near vertical
position. The control handle
remains within the profile of the
power unit at all times, even
when performing 90° turn.
A built-in 30 amp charger is
available as an option on all
models. This premium fan
cooled solid-state charger is
durable and efficient. It has an
advanced memory feature to
allow for opportunity charging.
The charger can be set for either
maintenance-free, wet-cell or
industrial batteries. An extension
cord is included with any truck
equipped with the built-in
14. Color-coded wiring
13.Keyless on/off toggle switch
in lieu of key switch
15. Two pre-programmed
performance levels
14.Drive/tow switch
15.Battery straps
16. 10" x 4" wide rubber drive tire
17. 3.25" x 4.5" wide Vulkollan
load wheels with debris guard
Battery and Charger
Two battery compartments are
available to suit your duty cycle.
18. Low overall height for fork and
load visibility
When the forward/reverse
thumb wheel is in neutral the
parking brake is immediately
activated thus preventing
unexpected movement.
The 7.9" battery compartment
(WP 2330/WP 2335) is designed
for the battery package. Battery
package options are as follows:
19. Paper retainer on battery
cover (WP 2330 and WP 2335)
battery charger.
20. Horn
21. Key switch
Technical Information
WP 2300 Series
Performance
Hydraulic System
The standard fork design has 6"
of lift with a conventional fork tip
and comes in 36", 42" and 48"
lengths. Fork spreads are 22"
or 27" wide.
Pallet Planning Guide
The WP 2300 benefits from
Crown’s design and engineering
excellence.
Heavy-duty 4" diameter hydraulic
motor with integral pump and
reservoir for maximum efficiency
and durability.
On WP 2300 models the load
wheel will drop into the second
opening of the pallet. When “A”
dimension equals nominal fork
length, “C” dimension is 6" maxi-
mum and “B” is 14" minimum.
The transistor control module
works in conjunction with a new
separately excited (SEM) drive
motor to provide excellent
The forks are roll-formed for
maximum strength and the pull
rods incorporate fork tip adjust-
ment to aid in pallet entry/exit.
Twin, hard-chromed lift cylinders
provide improved load stability.
Additionally, smaller twin lift
cylinders reduce truck length,
improving maneuverability.
A
acceleration and top travel
speed loaded or empty. Good
acceleration enhances efficient
pallet entry and exit to increase
productivity. Transistor control is
programmable for specific tasks
or operator skill levels.
All pivot points have Teflon-
impregnated, bronze, steel-
backed bushings. In addition,
each pivot point is provided with
a grease fitting to flush out dirt
and moisture, reducing down-
time and providing increased
service life.
Hydraulic lines, fittings and elbow
connections are minimized to
reduce heat from hydraulic oil
flow and improve efficiency.
C
C
B
B
At full lift, a top of stroke cutout
switch shuts the lift motor off,
which saves energy and prevents
motor overheating.
First
Second
Smooth travel and lift combine
with excellent controls to reduce
product damage and increase
productivity.
Opening
Opening
Serviceability
Other Options
1. Audible travel alarm
One piece steel power unit
cover is removed easily for
access to all major components.
The totally enclosed system is
protected by pressure, suction
and return line filtration. A conve-
nient fill plug allows for easy fluid
level checks.
Electrical System
2. Flashing lights
A heavy-duty 24-volt fused
electrical system provides good
travel and lift speeds.
Safety considerations and
Fork adjustment is done easily
using the threaded pull rod.
dangers associated with audible
travel alarms and flashing lights
include:
Separately excited motor control
eliminates directional contactors
reducing maintenance and
downtime.
Brake rotor and disc inspection
and replacement are easy.
Drive Unit and Brakes
Heavy-duty gear box with spur
gears for low noise emission.
• Multiple alarms and/or lights
can cause confusion.
Drive motor brush access is
excellent.
Drive unit is equipped with an
electromagnetic disc brake that
is spring applied and electrically
released. Brake is activated by
the control handle position.
Brake rotor and disc are easily
accessed for inspection and
replacement. Regenerative motor
braking assists brake effort and
improves component life.
• Workers ignore the alarms
and/or lights after day-in and
day-out exposure.
The transistor control is sealed
from dirt, dust and moisture for
trouble-free operation. Transistor
control features include over-
temperature protection, polarity
protection, self-test and visible
diagnostics.
Color-coded wiring speeds
troubleshooting and the Crown
transistor uses visible LED
flashes for fault communication.
Optional plug-in analyzer for
servicing and programming
capability.
• Operator may transfer the
responsibility for “looking out”
to the pedestrians.
• Annoys operators and
pedestrians.
Regenerative motor braking is
activated under a downhill con-
dition, during plugging or when
the directional control is returned
to neutral. “Regen” reduces heat
build-up and extends motor
brush life.
Control handle switch cap is
easily removed to expose
components.
Other Options Available
Contact your local Crown dealer.
Drive unit mounts in truck frame
with a permanently lubricated,
twin conical roller bearing that
disperses load forces evenly,
reducing maintenance and
downtime.
InfoPoint™ allows your techni-
cian to troubleshoot without
complicated schematics, wiring
diagrams or cumbersome ser-
vice manuals for over 95 percent
of your repairs. Simplicity is
complete with InfoPoint Quick
Reference Guide, color compo-
nent maps and “Information
nuggets” located on the truck.
Dimensions and performance
data given may vary due to
manufacturing tolerances.
Performance is based on an
average size vehicle and is
affected by weight, condition of
truck, how it is equipped and the
conditions of the operating area.
Crown products and specifica-
tions are subject to change
without notice.
An anti-roll down feature will
apply the brakes if the truck rolls
without a travel command.
Forks
The WP 2300 has two fork styles
to suit the application.
175-amp battery connector with
standard disconnect handle
.
The Crown “profiled fork” offers
tapered fork tips with shorter
lengths and wheelbase to
improve the turning radius
and facilitate load handling in
tighter areas.
Wheels and Tires
Drive tire - solid rubber
10" dia x 4" wide x 6.5" hub
Load wheels - Vulkollan
3.25" dia x 4.5" wide
Optional casters are
3.5" dia x 2" wide
Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
C
Fax 419-629-3796
crown.com
Because Crown is continually improving its products,
specifications are subject to change without notice.
Crown, the Momentum symbol, InfoPoint and The X10
Handle are trademarks of Crown Equipment Corporation.
Copyright 2004 Crown Equipment Corporation
SF14424 6/04
Printed in U.S.A.
|