Owner’s manual
Mode d’emploi
11. ESPECIFICACIONES
1. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on
the heater, moisture may form on the disc
or the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft
cloth. If moisture forms on the optical parts
of the player, do not use the player for about
one hour and the condensation will disap-
pear naturally to allow normal operation.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off
and on, the user is encouraged to consult the
dealer or an experienced radio/TV technician
for help.
Sintonizador de FM
Generales
Manual de instrucciones
Game de frecuencias: 87,9 MHz a 107,9 MHz
Sensibilidad útil: 11 dBf
Sensibilidad a 50 dB de silenciamiento: 17 dBf
Selectividad de canal alternativo: 75 dB
Separación estéreo (1 kHz): 35 dB
Tensión de alimentación: 14,4 V CC (permisible
de 10,8 V a 15,6 V), negativo a masa
Consumo de corriente: Menos de 15 A
Impedancia de los altavoces: 4 Ω (permisible de
4 Ω a 8 Ω)
Respuesta en frecuencia (±3 dB): 30 Hz a 15 kHz
Peso: 3,97 lb. (1,8 kg)
Dimensiones:
7” (178 mm) de anchura × 2” (50 mm) de
altura × 6-1/8” (155 mm) de fondo
■Contents
Sintonizador de AM
Respuesta en frecuencia: 530 kHz a 1.710 kHz
Sensibilidad útil: 25 µV
English
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
1. PRECAUTIONS...........................................................2
2. CONTROLS.................................................................3
3. BUTTON TERMINOLOGY..........................................4
4. FEATURES..................................................................5
5. HANDLING COMPACT DISCS...................................6
6. DCP.............................................................................7
7. REMOTE CONTROLL ................................................8
8. OPERATION..............................................................10
9. TROUBLESHOOTING ..............................................16
10.ERROR DISPLAYS...................................................17
11.SPECIFICATIONS.....................................................18
7”
2”
(50 mm)
(178 mm)
Reproductor de discos compactos
3. This unit uses
a
precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
Sistema: Sistema de audio de discos compactos
Discos utilizables: Discos compactos
Respuesta en frecuencia: 10 Hz a 20 kHz (±1dB)
Relación señal-ruido: 100 dB (1 kHz) IHF-A
Gama dinámica: 95 dB (1 kHz)
7-3/8”
(188 mm)
2-1/4”
(58 mm)
Distorsion armónica: 0,01%
■Table des matières
Français
CAUTION
XD516
Notas:
Las especificaciones están de acuerdo con las nor-
mas de la EIA.
•
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
Audio
Salida de potencia máxima:
200 W (50 W × 4 ch)
Salida de potencia media continua:
18 W × 4, con 4 Ω, 20 Hz a 20 kHz,1% de
distorsión armónica total
1. PRÉCAUTIONS.........................................................19
2. COMMANDES.............................................................3
3. NOMENCLATURE DES TOUCHES .........................20
4. CARACTÉRISTIQUES..............................................21
5. MANIPULATION DES DISQUES COMPACTS ........22
6. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......23
7. TÉLÉCOMMANDE....................................................24
8. FONCTIONNEMENT.................................................26
9. DÉPISTAGE DES PANNES......................................32
10.AFFICHAGE DES ERREURS...................................33
11.SPÉCIFICATIONS.....................................................34
AM/FM CD PLAYER
WITH CD CHANGER CONTROL
•
Las especificaciones y el diseño están sujetos a cam-
bio sin previo aviso por motivo de mejoras.
•
RADIO AM/FM-LECTEUR CD
AVEC PILOTAGE DE CHANGEUR CD
•
RADIO AM/FM Y REPRODUCTOR CD
CON CONTROL DE CAMBIADOR DE CD
MODEL
Acción de control de graves (30 Hz): ±13 dB
Acción de control de agudos (10 kHz): ±10 dB
Salida de línea (con CD, 1 kHz, 10 kΩ): 1,8 V
X5
12V
GROUND
AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
■Índice
Español
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR
1. PRECAUCIONES......................................................35
2. CONTROLES..............................................................3
3. NOMENCLATURA DE LOS BOTONES...................36
4. CARACTERÍSTICAS ................................................37
5. MANEJO DE LOS DISCOS COMPACTOS..............38
6. PANEL DE CONTROL DESMONTABLE (DCP) ......39
7. CONTROLADOR REMOTO......................................40
8. OPERACIÓN.............................................................42
9. SOLUCIÓN DE PROBLEMAS..................................48
10.INDICACIONES DE ERROR ....................................49
11.ESPECIFICACIONES ...............................................50
SUBCHAPTER
J
APPLICABLE AT DATE OF MANUFACTURE.
CLARION CO.,LTD.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN
Bottom View of Source Unit
MANUFACTURED:
286- 324-00
Clarion Co.,Ltd.
MADE IN CHINA
SERIAL No.
PE-2310B
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL
VIOLATE FCC APPROVAL.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
Be sure to unfold and read the next page.
Veuillez déployer et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
PE-2386B
280-7596-00
•
2001/1 (D C)
XD516
2
4. FEATURES
■ Rotary Encoder Volume Control
■ DIN Chassis with Detachable Control Panel
■ Z-Enhancer with 3 Mode Sound Selector
■
® FM Reception System
■ AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory
■ 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters
■ Zero-Bit Detector Mute Circuit
■ Repeat/Random Play/Intro Music Scan
■ Multi-Color LC Display
■ 4-Channel RCA Line Level Output with Fader Control
■ 200 W (50 W × 4) Maximum Power Output
■ Infrared Remote Control
Flip Down Panel
This unit uses a flip-down structure that makes possible large-size displays.
3. Do not use the FLIP DOWN PANEL as a tray
CAUTION
When opening and closing the FLIP DOWN PANEL,
be careful not to catch your fingers. They could be
injured.
to place objects on when it is open.
4. When closing the FLIP DOWN PANEL, do
not press the Open button 1.
5. Strong impacts to the operating or display
section can cause damage or deformation.
1. Always use this unit with the FLIP DOWN
PANEL closed.
6. If the flip down panel does not open fully,
gently open it with your hand.
2. Do not force operations or use this device
abnormally when opening or closing the
FLIP DOWN PANEL.
XD516
5
5. HANDLING COMPACT DISCS
This unit has been designed specifically for play-
Note on Compact Discs
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
back of compact discs bearing the
No other discs can be played.
mark.
To remove the compact disc from its storage
case, press down on the center of the case and
lift the disc out, holding it carefully by the edges.
No
Proper way to hold
the compact disc
Removing the disc
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner to
clean compact discs.
Always handle the compact disc by the edges.
Never touch the surface.
No
To remove fingermarks and dust, use a soft
cloth, and wipe in a straight line from the center
of the compact disc to the circumference.
No
Do not use compact discs that have large
scratches, are misshapen, or cracked, etc. Use
of such discs will cause misoperation or damage.
No
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge of
the disc.
Ball-point pen
Roughness
Do not expose compact discs to direct sunlight
or any heat source.
No
Note:
Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These
•
may get caught in the internal mechanism and damage the disc.
6
XD516
6. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
Attaching the DCP
1. Hold down POWER button 3 for 1 second or
1. Insert the right side of the DCP into the main
unit.
longer to switch off the power.
2. Insert the left side of the DCP into the main
unit.
2.
DCP
2. Deeply push in Open button 1 to unlock the
1.
FLIP DOWN PANEL.
If the FLIP DOWN PANEL does not open fully,
gently open it with your hand.
DCP Release button 1
CAUTION
• The DCP can easily be damaged by shocks. After
removing it, be careful not to drop it or subject it
to strong shocks.
• If the FLIP DOWN PANEL is kept open, the DCP
may drop due to vibration of the car.
This results in damage to the DCP. So close the
FLIP DOWN PANEL or remove the DCP to store
into the case.
• The connector connecting the unit and the DCP is
an extremely important part. Be careful not to
damage it by pressing on it with fingernails,
screwdrivers, etc.
3. Pull the DCP toward you and remove it.
DCP
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
4. Close the HOLD FLAP.
HOLD FLAP
CAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
XD516
7
7. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30° in all directions
Remote Control Unit
Signal transmitter
&
(
¡
)
*
£
™
¢
¶
∞
§
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
AA (SUM-3, IECR-6/1.5V)
Batteries
2. Insert the AA (SUM-3, IECR-6/1.5V) batter-
ies that came with the remote control unit fac-
ing in the directions shown in the figure, then
close the rear cover.
Notes:
Using batteries improperly can cause them to explode.
Take note of the following points:
Rear cover
• When replacing batteries, replace both batteries with
new ones.
Rear side
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
8
XD516
Functions of Remote Control Unit Buttons
Mode
Radio
CD
CD changer
Button
& FUNC
Turns power on and off. When pressed and held for 1 second: Turns power off.
Switches between radio, CD and CD changer.
* BAND
Switches reception band.
Plays the first track.
Top play.
Moves the next disc in
increasing order.
DISC UP
PROG
TOP
( VOLUME
) SEARCH
Increases and decreases volume (in all modes).
Moves preset channels up Moves tracks up and
Moves tracks up and
down.
and down.
down.
When pressed and held for When pressed and held for
1 second:
Fast-forward/
fast-backward.
1 second:
Fast-forward/
fast-backward.
¡ PLAY/PAUSE Turns mute on and off.
Switches between
playback and pause.
Switches between
playback and pause.
™ MUTE
£ ISR
Turns mute on and off.
Switches between
playback and pause.
Switches between
playback and pause.
Recalls ISR radio station in memory.
Press and hold for more than 2 seconds: Stores current station into ISR memory
(radio mode only).
¢ DISP
Switches among main display, sub display and clock display.
∞ SCAN
Preset scan.
When pressed and held for
2 seconds: Auto store.
Scan play.
Scan play.
When pressed and held for
1 second: Disc scan play.
PS/AS
§ RPT
No function.
Repeat play.
Repeat play.
When pressed and held for
1 second: Disc repeat play.
BLS
¶ RDM
No function.
Random play.
Random play.
MONI
When pressed and held for
1 second: Disc random
play.
* Some of the corresponding buttons on the source unit and remote control unit have different functions.
XD516
9
8. OPERATION
Note:
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).
•
Adjusting the Treble
Basic Operations
1) Press A-M button 2 and select “TREB”.
CAUTION
2) Turning the Rotary knob # clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
The factory default setting is “0”. (Adjustment
range: –6 to +6)
*
3) When the adjustment is complete, press A-M
button 2 several times until the function
mode is reached.
Turning ON the Power and Adjusting
the Volume
1) Press the POWER button 3.
To turn off the power, press the POWER button
3 for 1 second or longer.
*
Adjusting the Balance
1) Press A-M button 2 and select “BAL”.
2) Press the FNC button 3 and select another
operation mode. Every time the FNC button
3 is pressed, the display changes the oper-
ation mode as:
2) Turning the Rotary knob # clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
Radio ➜ CD ➜ CD changer ➜ Radio
The factory default setting is “0”. (Adjustment
range: L9 to R9)
*
Notes:
The operation mode not connected to the unit will not
be selected.
•
3) When the adjustment is complete, press A-M
button 2 several times until the function
mode is reached.
If the CD mode is selected when no disc is inserted,
the display shows “ NO DISC”.
•
3) Turning the Rotary knob
#
clockwise
Adjusting the Fader
increases the volume; turning it counterclock-
wise decreases the volume.
1) Press A-M button 2 and select “FAD”.
The volume level is from 0 (minimum) to 33 (max-
imum).
*
2) Turning the Rotary knob # clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
Audio Mode Adjustments
The factory default setting is “0”. (Adjustment
range: F9 to R9)
Press the A-M button 2 to select the adjustment
mode. The mode switches as follows each time
the A-M button is pressed:
BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous
mode
*
3) When the adjustment is complete, press A-M
button 2 several times until the function
mode is reached.
Setting the Z-enhancer
Adjusting the Bass
This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.
1) Press A-M button 2 and select “BASS”.
2) Turning the Rotary knob # clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
The factory default setting is “Z-EHCR OFF”.
*
Each time you press Z-EHCR button 0, the
tone effect changes in the following order.
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜
“Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜
“Z-ENHANCER 1”...
The factory default setting is “0”. (Adjustment
range: –6 to +6)
*
3) When the adjustment is complete, press A-M
button 2 several times until the function
mode is reached.
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
10
XD516
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
Radio Mode Operations
FM Reception
For enhanced FM performance the
Loudness Effect
®
In order to turn on/off the loudness effect, use
the LD button 2 for 1 second or longer. Every
time the LD button 2 is pressed and held for 1
second or longer, the loudness effect switches
on and off.
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Listening to the Radio
1) Press the FNC button 3 to select the radio
When the loudness effect is on, the display will show
“LD”.
*
mode, then the radio will be on.
2) To select a preset band, press the BND but-
ton !, then select one of the preset bands
such as FM1, FM2, FM3, or AM. Every time
the BND button ! is pressed, the display will
change as:
Switching the Display
Every time the DISP button 5 is pressed, the
display will change between the main display
and the clock display.
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1
Main display
3) Press the SRCH Left/Right button @, then
the station at which there is a broadcast will
be selected (Seek selection).
Mute
Clock display
Use this function to turn off the sound immedi-
ately.
Press the MUTE button $. The sound turns off
and “MUTE” appears on the display. Press the
MUTE button again to cancel the mute mode.
Main display ...
Manual Tuning
1) Press the BND button !, then select FM1,
Setting the Clock
FM2, FM3 or AM.
1) Press the DISP button 5 to display the clock
2) Press and hold the BND button ! for 2 sec-
onds or longer, then the display will show
“MANU”, which means that a manual selec-
tion function is on.
display.
2) Press and hold the DISP button 5 for 1 sec-
ond or longer.
3) Press the SRCH Left button @, then set the
3) Press the SRCH Left/Right button @ and
current hour.
select the right station.
4) Press the SRCH Right button @, then set the
current minute.
Seek Tuning
5) Press the DISP button 5, then the clock is
1) Press the BND button !, then select FM1,
set.
FM2, FM3 or AM.
Notes:
2) If the “MANU” on the display is on, press and
hold the BND button ! for 1 second or
longer. When the “MANU” display is off, the
Seek Selection function is on.
If you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
•
If you remove the vehicle’s battery for a check or
repair, the clock will be reset, so you must set it again.
•
3) Press the SRCH Left/Right button @, then
when it selects the station in which there is a
broadcast, it automatically stops.
XD516
11
3) Press and hold the ISR button 4 for 2 sec-
Preset Memory Function
onds or longer.
Preset Memory Function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3
and AM.
Recalling ISR
Press the ISR button 4 then the display will
show “ISR”, then the radio station previously
memorized will be selected. Press the ISR but-
ton 4 again to disengage the unit from the
Recalling ISR function.
Note:
When the present memory function is used, all the
content of the memory will be erased.
•
Manual memory function
1) Press the BND button !, and select the
Area Change
Use this function when you are using the car
stereo anywhere outside the U.S.
band you want to store in the memory.
2) Press the SRCH Left/Right button @ then
select the station you want to store in the
memory.
Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10 kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency range.
The table below lists the frequency specifica-
tions for the U.S. and other countries.
3) Press and hold the Preset button 9 for 2
seconds or longer, then the station will be
stored in the memory.
Auto store function (Automatic Station Store)
1) Press the BND button !, then select the
band you want to store in the memory.
Initial Setting New Setting
(U.S. standard) (outside U.S.)
2) Press and hold the AS button 8 for 2 sec-
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.
Frequency
spacing
10 kHz
530 to
9 kHz
531 to
AM
FM
Note:
Frequency
range
When the number of stations stored is less than six,
the previous content of the memory for each direct
button will be retained.
•
1,710 kHz 1,629 kHz
Frequency
spacing
200 kHz
87.9 to
50 kHz
87.5 to
Preset Scanning (Preset Station Scan)
Frequency
range
When the PS button 8 is pressed, the preset
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
107.9 MHz 108 MHz
Switching the area change
Outside U.S. (New Setting)
While pressing the BND button !, press the
SRCH Left button @, then “outside U.S.” will be
selected.
Instant Station Recall (ISR)
Inside U.S. standard (Initial Setting)
With this function, a specific radio station can be
recalled from any mode.
While pressing the BND button !, press the
SRCH Right button @, then the “U.S. standard”
will be selected.
ISR memory
1) Press the FNC button 3, then select the
radio mode.
2) Select the radio station which you want to
store in the memory.
12
XD516
Ejecting the CD
CD Mode Operations
1. Press Open button 1 to open the FLIP
DOWN PANEL.
Loading a Disc
2. Press Eject button % to eject the CD. Take it
1. Press Open button 1 to access the CD
out from the ejected position.
insertion slot behind the FLIP DOWN.
3. Close the FLIP DOWN PANEL.
2. Insert the disc into the CD insertion slot with
its label side up, then the CD will start play-
ing.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
For 5-inch (12 cm) CD For 3-inch (8 cm) single CD
• If the FLIP DOWN PANEL does not open fully, gently
open with your hand.
• After taking out the CD, be sure to close the FLIP
DOWN PANEL.
If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
When inserting a single CD (3”(8 cm)), insert it from
the center of the slot.
*
8 cm CDs are not auto reloaded. Be sure to remove
it when ejected.
When inserting a single CD (3”(8 cm)), do not con-
nect an adapter.
*
Note:
• If you force a CD into before auto reloading, this can
damage the CD.
Notes:
Some CDs recorded in CD-R mode may not be
•
usable.
Top Function
Press the TOP button !, then the CD will start
Even when recorded in CD-R/W mode, some CDs
may not be usable.
•
3. Close the FLIP DOWN PANEL.
playing from the first song (track number 1).
CAUTION
Selecting Tracks (songs)
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Note:
• If the FLIP DOWN PANE, does not open fully, gently
open with your hand.
Press the SRCH Left/Right button @.
: Playback will start from the next track.
: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
• After loading a CD, always close the FLIP DOWN
PANEL.
Fast-Forward and Fast-Backward
Listening to the Disc already Inserted
Press and hold the SRCH Left/Right button @.
Press the FNC button 3 to select the CD mode,
the CD will start playing.
: To fast-forward
: To fast-backward
Pressing the SRCH Left/Right button for 1 second or
*
Stopping (pausing) Playback
Press the Play/Pause button $. “PAUS”
appears on the display.
longer will move forward or backward 5 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.
Press the Play/Pause button $ again to resume
playback.
XD516
13
Scan Play (Intro Music Scan)
CD Changer Mode Operations
Press the SCN button 8, then the display
shows “SCN”, then the CD will play the first 10
seconds of each track of the whole disc. Press
the SCN button 8 again to disengage the unit
from scan play.
Listening to the Disc
Press the FNC button 3 and select the CD
changer mode, then the CD starts playing.
A scan play will start from the track following the one
currently playing.
*
Repeat Play
If “NO MAGA” appears on the display, insert the mag-
*
Press the RPT button 7, then the display shows
“RPT”, then the track currently playing will be
played repeatedly. Press the RPT button 7
again to disengage the unit from repeat play.
azine into the CD changer. Then, while the player
checks the magazine “LOADING” appears on the dis-
play.
If “NO DISC” appears on the display, eject the maga-
zine and insert discs into each slot. Then, reinsert the
magazine back into the CD changer.
*
Random Play
Press the RDM button 6, then the display will
show “RDM”, then the entire tracks on the disc
will be played at random. Press the RDM button
6 again to disengage the unit from random play.
Stopping (pausing) Playback
Press the Play/Pause button $. “PAUS”
appears on the display.
Press the Play/Pause button $ again to resume
playback.
Selection of CDs
Press the Direct button (1 to 6) 9 then select
the CD you wish to play.
If there is no CD in a slot of magazine, it is invalid to
press the Direct button 9 corresponding to its disc
*
number.
Selecting Tracks (songs)
Press the SRCH Left/Right button @.
: Playback will start from the next track.
: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the SRCH Left/Right button @.
: To fast-forward
: To fast-backward
Pressing the SRCH Left/Right button for 1 second or
*
longer will move forward or backward 5 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.
14
XD516
Scan Play (Intro Music Scan)
Switching Magazine
Press the SCN button 8, then the display
shows “SCN”, then the CD will play the first 10
seconds of all the tracks of all CDs. Press the
SCN button 8 again to disengage the unit from
scan play.
This function can be used only when the con-
nected CD changer can store a multiple number
of magazines.
Every time the MAG button ! is pressed, the
next magazine will be selected.
A scan play will start from the track following the one
currently playing.
*
Disc scan play
Press and hold the SCN button 8 for 1 second
or longer, then the display will show “
” and
“SCN”, and plays the first 10 seconds of the first
song of all the CDs in the CD changer.
Press the SCN button 8 again to disengage the
unit from disc play.
A scan play will start from the first tracks of next CDs
following the one currently playing.
*
Repeat Play
Press the RPT button 7, then the display shows
“RPT”, then the track currently playing will be
played repeatedly. Press the RPT button 7
again to disengage the unit from repeat play.
Disc repeat play
Press and hold the RPT button 7 for 1 second
or longer, then the display shows both the
“
” and “RPT”, then the disc currently being
played will be played repeatedly.
Press the RPT button 7 again to disengage the
unit from disc repeat play.
Random Play
Press the RDM button 6, then the display will
show “RDM”, then the entire tracks on the disc
will be played at random.
Press the RDM button 6 again to disengage the
unit from disc random play.
Disc random playback
Press and hold the RDM button 6 for 1 second
or longer, then the display will show both the
“
” and “RDM”, then the entire tracks of all
the discs in the CD changer will be played at ran-
dom.
Press the RDM button 6 again to disengage the
unit from disc play.
XD516
15
9. TROUBLESHOOTING
Problem
Cause
Measure
Power does not
turn on.
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
Nothing happens The microprocessor has
Turn off the power, then press the Open button 1
when buttons are malfunctioned due to noise, and remove the DCP.
pressed.
etc.
Press the reset button for about 2 seconds with a
thin rod.
Display is not
accurate.
Reset button
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty.
cleaning alcohol.
Compact disc
cannot be
loaded.
Another compact disc is
already loaded.
Eject the compact disc before loading the new one.
Sound skips or is Compact disc is dirty.
noisy.
Clean the compact disc with a soft cloth.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
Sound is bad
directly after
power is turned
on.
Water droplets may form on Let dry for about 1 hour with the power on.
the internal lens when the
car is parked in a humid
place.
16
XD516
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
CD ER2
Cause
Measure
A CD is caught inside the CD deck This is a failure of CD deck’s
and is not ejected.
mechanism and consult your store
of purchase.
CD ER3
A CD cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped disc.
CD ER6
A CD is loaded upside-down inside Eject the disc then reload it
the CD deck and does not play. properly.
CDCH ER2
CDCH ER3
CDCH ER6
A CD inside the CD changer is not This is a failure of CD changer’s
loaded.
mechanism and consult your store of
purchase.
A CD inside the CD changer
Replace with a non-scratched,
cannot be played due to scratches, non-warped disc.
etc.
A CD inside the CD changer
cannot be played because it is
loaded upside-down.
Eject the disc then reload it
properly.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
XD516
17
11. SPECIFICATIONS
FM Tuner
General
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity: 11 dBf
Power Supply Voltage: 14.4 V DC (10.8 V to 15.6
V allowable), negative ground
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)
Weight: 3.97 lb. (1.8 kg)
Dimensions:
7” (178 mm) Width × 2” (50 mm) Height ×
6-1/8” (155 mm) Depth
AM Tuner
7”
(178 mm)
2”
(50 mm)
Frequency Range: 530 kHz to 1,710 kHz
Usable Sensitivity: 25 µV
CD Player
System: Compact disc audio system
Usable Discs: Compact disc
Frequency Response: 10 Hz to 20 kHz (±1 dB)
Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 95 dB (1 kHz)
7-3/8”
(188 mm)
2-1/4”
(58 mm)
Harmonic Distortion: 0.01%
Notes:
Specifications comply with EIA Standards.
•
•
Specifications and design are subject to change with-
out notice for further improvement.
Audio
Maximum Power Output:
200 W (50 W × 4 ch)
Continuous Average Power Output:
18 W × 4, into 4 Ω, 20 Hz to 20 kHz,1%THD
Bass Control Action (30 Hz): ±13 dB
Treble Control Action (10 kHz): ±10 dB
Line Output (with CD 1 kHz, 10 kΩ): 1.8 V
18
XD516
|